Fujitsu fi-7300NX, Руководство оператора

Страница: 45 / 321

When Connecting the Scanner via a Wired LAN
About the procedure from unpackaging the scanner to turning the power on, refer to Getting Started.
1
Turn on the scanner.
For details, refer to
How to Turn the Power ON (page 56) .
2
In the screen which asks whether or not to connect via Wi-Fi, press the [No] button.
3
In the screen for selecting a connection method, select [Wired LAN] and press the [Next] button.
4
Check the setting items and the order of them on the window displayed.
5
Connect the scanner to a network device (such as a switch, a hub, or a router) via a LAN cable.
6
On the window displayed in step 4 , press the [Start] button.
7
Specify the following items:
● IP Address
Set an IP address for the scanner.
When you set an IP address manually, configure [Subnet Mask] and [Default Gateway].
● DNS Server
Set this item to use a DNS server.
Specify IP addresses for [Primary DNS] and [Secondary DNS].
● Proxy Server
Set this item to use a proxy server.
Specify [Host Name/IP address] and [Port Number]. If an authentication is necessary, specify [Username]
and [Password].
●
Network Encryption
Select whether or not to encrypt network communications.
● PaperStream NX Manager
Set this item to use PaperStream NX Manager.
Specify [Host Name/IP address] and [Port Number].
Scanner Setup
45