5.7 Z-Folding
99
M
a
k
ing Cop
ies
Add
e
d
Fe
a
ture
s
Ba
si
c
F
e
at
u
res
Ima
g
e Qu
a
lit
y
Ou
tput For
ma
t
St
ore
d
Job Temp
la
tes
3
Select On for Z Fold.
When selecting Z Fold with stapling/punching:
The copies are stapled as shown below depending on the position(s) specified
for stapling or punching holes.
(1)Select Collated/Stapled/Punched and specify the position
to be stapled or punched.
(2)Check Original Orientation.
4
Select Save to specify settings for other features if necessary.
5
Press Start.
Copies will be made and output to the finisher tray.
●
Original Orientation
Head to Top
Head to Left
Large Output
Auto
Collated
Stapled/Punched
Uncollated
Off
Off
On
Z Fold
Off
On
Left
2 Holes
Top
2 Holes
Right
2 Holes
Punching
Left
4 Holes
Top
4 Holes
Right
4 Holes
Large paper is
folded to align
with paper
edges.
Cancel
Finishing
Save
●
When Z Fold is selected with
stapling/punching, the number of
copies may be different from the set
stapled/punched only.
●
When the positions for punching and
stapling are in conflict (e.g. stapling
on the top left and punching on the
right), the machine will not start even
if you press the Start button. Check
the positions again.
When Top Left is selected
When Top Right is selected
Stapling
left side
Stapling
right side