manualshive.com logo in svg

Froling TURBOMAT TM 150, Руководство по установке

Поделиться
Скачать
Froling TURBOMAT TM 150 Скачать руководство пользователя страница 40

4.5.15 Fitting the WOS Drive

❒ Fix the motor mounting bracket (1) with threaded bolts (2) to the heat exchanger.
❒ Fit the flat head screw, bore bush and nut (3) to the WOS disc (4).
❒ Insert the WOS disc (4) into the gear motor (5).

➥ The key groove in the ash screw WOS disc must be aligned with the key

groove in the gear motor.

❒ Slide the key (6) into the groove and fit the shaft retainer (7).

 

4-5mm

❒ Fit the gear motor (5) complete with the WOS disc (4) to the motor mounting

bracket (1) with the two top screws.

➥ The motor must face downwards.

❒ Position the bracket (8) for the function monitor behind the motor mounting bracket

(1) and then fix in place together with gear motor (5) with the two bottom screws.

 

4

Installation

Installing the boiler

40

Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

Содержание TURBOMAT TM 150




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды