Table of Contents
1
General
4
2
Safety
5
2.1
Hazard levels of warnings
5
2.2
Qualification of assembly staff
6
2.3
Personal protective equipment for assembly staff
6
2.4
Design Information
6
2.4.1
Notes on standards
6
General standards for heating systems
6
Standards for structural and safety devices
7
Standards for heating water
7
Regulations and standards for permitted fuels
7
2.4.2
Installation and approval of the heating system
7
2.4.3
General information for installation room (boiler room)
8
2.4.4
Requirements for central heating water
8
2.4.5
Notes for using pressure maintenance systems
9
2.4.6
Return lift
10
2.4.7
Use with storage tank
10
2.4.8
Chimney connection/chimney system
10
Draught limiter
11
Boiler data for planning the flue gas system
11
3
Technology
12
3.1
Dimensions
12
3.2
Components and connections
13
3.3
Technical data
14
4
Installation
16
4.1
Transport
16
4.2
Positioning
16
4.3
Temporary storage
16
4.4
Setting up in the boiler room
16
4.4.1
Moving the boiler in the boiler room
16
4.4.2
Minimum space requirements in the boiler room
17
4.5
Installing the boiler
18
4.5.1
General information
18
4.5.2
Bolting together the combustion chamber and heat exchanger
19
4.5.3
Fitting the thermal discharge safety sensor
20
4.5.4
Installing the combustion chamber firebricks
21
4.5.5
Changing over the WOS rods (where necessary)
23
4.5.6
Fitting the insulation base frame
25
4.5.7
Fitting the insulating side panels
27
4.5.8
Fitting the ash cans to the heat exchanger ash removal unit
29
4.5.9
Fitting the heat exchanger ash removal unit with ash screw (optional)
30
4.5.10
Fitting the combustion chamber ash removal unit
34
4.5.11
Fitting the control cabinet
36
4.5.12
Fitting the combustion air fan
37
4.5.13
Fitting the safety temperature limiter, boiler sensor and return sensor.
38
Table of Contents
2
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
