manualshive.com logo in svg

Froling TURBOMAT TM 150, Руководство по установке

Поделиться
Скачать
Froling TURBOMAT TM 150 Скачать руководство пользователя страница 36

 

❒ Fit the ash removal unit flange with seal on the right of the combustion chamber.
❒ Fit the cover (1) for the ash removal unit flange.
❒ Fit the safety switch (2) to the bracket (3).
❒ Fit the bracket (3) to the insulation side panel.
❒ Bend the clamp (4) over the insulation side panel. Lay the safety switch cable to

the control cabinet.

 

4.5.11 Fitting the control cabinet

❒ Hang the control cabinet (1), with the fixing bolts (2) provided (flat-head bolts in

the control cabinet packaging), in the locating slots (3) in the insulation side panel.

❒ Open the control cabinet door. Fix the bottom corners of the control cabinet to the

insulation side panel.

❒ Fit the cable duct (4) on top of the control cabinet.

 

 

4

Installation

Installing the boiler

36

Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

Содержание TURBOMAT TM 150




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды