❒ Press the clamp (1) forwards and remove the cover plate of the ash cans.
➥ Store the cover plate in a suitable location where you can find it later. It will be
needed when disposing of the ash.
❒ Position both ash cans on the ash removal unit flanges.
❒ Push the side lever on the ash removal flange downwards to fix the ash can in
place.
❒ Push the key plate into the safety switch.
❒ Set the safety switch so that the key plate engages correctly.
❒ Tighten the safety switch screws.
4.5.10 Fitting the combustion chamber ash removal unit
❒ Fit the flange plate (1) with the seal (2) and the flange bearing (3) on the left of the
combustion chamber.
❒ Push the ash screw (4) with the seal washer (5) on the right of the combustion
chamber.
❒ Fit the spacer (7) and the circlip (8) to the shaft stub.
4
Installation
Installing the boiler
34
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
