90
Chapter 3 Working with MultiLab
2. Click
Analysis
on the menu bar, then click
Timing Wizard
to open
step 1 of the Timing Wizard dialog:
Figure 32: Timing Wizard – Measurement
3. Click an option to select measurement:
Time
,
Velocity
or
Acceleration
4. Click
Next
to move to step 2:
Figure 33: Timing Wizard – Method
5. Click an option to select the measuring method
6. If required enter the body’s width, or the distance between the gates
in cm in the appropriate edit box (in velocity and acceleration
measurements only)
7. Click
Finish
to display the results
8. If you want to change the method or measurement, click
Back
to
return to the Timing Wizard. To exit the Timing Wizard click
OK
3.Measuring methods
The Timing Wizard offers you various methods of analyzing the different
measurements. In some measurements you will be asked to enter the dimension of
the moving body, or the distance between the two photogates to allow for the
calculation of velocity and acceleration.
