Chapter 3 Working with MultiLab
87
6. Click
Close
to return to MultiLab
7. Click
Run
on the main toolbar to begin recording
3.7.3.
Create Your Own Worksheet
Creating a worksheet consist of two steps. First, create an HTML document using
your HTML editor (For example, Word or Front Page). This file should include the lab
manual and the experiment instructions (see below). The second step is to use the
MultiLab software to create a configuration file, which is a file that will store the
specific settings you wish to define for the experiment. These include the TriLog
setup, MultiLab
’
s layout, the recording mode, the graph format desired, special
preset graph scaling, sensors measurement etc.
1.Create an HTML document with Word
1. Create a new Web page
1. Open Word
2. In the
File
menu, click
New
3. Do one of the following:
•
On the General tab, click
Web Page
to
open a blank Web page
•
On the
Web Pages
tab, click the
template that you would like to base
your Web page on
4. Enter your texts and pictures
5. Click
Save
on the toolbar
6. Navigate to C:\Program Files\Fourier Systems\MultiLab\Workbook
7. Click
Save
2. Create a Web page from an existing Word document
1. Open the existing file with Word
2. In the
File
menu, click
Save as Web Page
3. Navigate to C:\Program Files\Fourier Systems\MultiLab\Workbook
4. Click
Save
2.Create a configuration file
1. Open the MultiLab program
2. Click
Workbook
on the menu bar, and then click
create new
worksheet
