14
Chapter 1 TriLog
4.
Select total number of samples
Press the
SAMPLES
button to display the current total number of recording points:
_ _ _ _ SAMPLES_ _ _ _ _
S = 500
The cycle of sample points is moved through by pressing the
SAMPLES
button until
the appropriate number of points is found.
5. Start
recording
Press the
RUN
button to start recording.
The LCD screen will display:
Logging
At rates of up to 10 samples per second TriLog displays the recorded data values,
the number of the last recorded data sample, and the total number of samples. Use
the
RATE
button to scroll through the different sensor
’
s data and the number of
samples.
You can stop recording any time by pressing the
RUN
button a second time.
Otherwise logging will stop after the selected number of samples where taken. The
LCD screen will display the number of the experiment in TriLog
’
s memory:
_ _ _ LOGGER – RUN _ _ _
Log 01 ended
1.2.4.
Working with the TriLog keypad
On / Off
Press for one second to turn TriLog on. Press a second time to
turn it off
Note
:
Pressing OFF
will not
erase the sample memory. The data stored
in the memory will be kept for up to 10 years.
Rate
When programming TriLog press to scroll to the desired recording
rate.
When TriLog is running (in rates up to 10/s) use this button to
scroll through the different data displays
Samples
When programming TriLog press to scroll to the desired number of
recording samples.
When TriLog is running in manual mode press this button each
time you want to collect a sample
Run
Press to begin recording. Press a second time to stop
