28
Chapter 2 Working with Palm Handheld
2. Assign a sensor and its calibration to input 1 by tapping on the
sensor picker and selecting a sensor name from the installed sensor
list. The ImagiProbe 3.0 application will assign a default calibration
for the sensor. If you wish to change the default calibration to
another preinstalled calibration, tap the calibration picker
3. If necessary, follow the same steps to assign sensors to additional
inputs (maximum of 8 sensors). Assign sensors to additional inputs
only if you intend to collect data with multiple sensors
simultaneously.
2.4.4.
Viewing Collected Data
When you have completed a data collection trial, the ImagiProbe application returns
you to the Data form. In the Data form, you can page through data; view specific
values in the line graph; zoom in and out of data.
1.Paging through Data
To move through your collected data, tap on the data navigation buttons to page
forward and backward. You can page forward or backward a page at a time or jump
directly to the beginning or end of the data.
2.Viewing Specific Values in a Line Graph
To view specific values:
1. Move to the graph page that contains the specific values you wish to
view.
2. Tap and hold inside the plotting area.
3. View specific values in the popup boxes.
