62
Chapter 3 Working with MultiLab
3.4.3.
The Table Display
Click
Table
to display or to remove the table window.
When you start a new recording, MultiLab displays the new data on the table.
To add or remove columns from the table, use the
Edit table
tool (see below).
1. Editing data values
You can change the value of any data point. When any value is changed, MultiLab
automatically creates a copy of the data set and leaves the original data unchanged.
To do this:
1. Select a data cell by clicking on it
2. Type in the new value
3. Press
Enter
on the keyboard to accept (you can also press Tab or
the arrow keys to accept and move to the next cell)
2. Editing the table
To add or remove data sets from the table:
1. Click
Edit table
on the table toolbar to open the Edit table dialog
box:
Figure 15: Edit table dialog box
To add columns to the table:
2. Select one or more of the data sets from the
Available Columns
list
3. Click
Add
To remove columns from the table:
4. Select one or more of the data sets from the
Current Columns
list
5. Click
Remove
6. Click
OK
