66
Chapter 3 Working with MultiLab
3.5.
Program TriLog
3.5.1. Setup
1. Quick setup
Use the Setup wizard to guide you through the setup process.
1. Click
Setup wizard
on the main toolbar to open the setup
wizard:
Figure 16: Setup wizard step 1 of 3
The first step is to assign sensors to each input. If you are working
with TriLog in Auto ID mode, the sensors are selected automatically
as you plug them in to the TriLog. Otherwise, you can manually select
the sensors you are using from the corresponding input drop lists.
2. Click
Next
to move to the second step:
Figure 17: Setup wizard step 2 of 3
