Foma D902iS, Руководство пользователя

Страница: 512 / 517

27
AT ＊ DGPIR=n Specifies whether to notify the caller ID for packet communication. This specification is effective both
for outgoing and incoming calls.
n=0: The APN is used as it is when a packet communication is established. (default)
n=1: Adds “184” to the APN when a packet communication is established.
n=2: Adds “186” to the APN when a packet communication is established.
ex. Enter AT ＊ DGPIR=0 Display AT ＊ DGPIR? Test AT ＊ DGPIR=?
AT ＊ DRPW Shows the level of power reception in the format of “ ＊ DRPW:m”, where the value of m ranges from 0
to 75.
ex. Enter AT
＊
DRPW Display None Test AT
＊
DRPW=?
+++ Changes FOMA terminal mode from the online data to the online command. The duration of escape
guard is fixed to 1 sec.
ex. Enter +++ Display None Test None
AT+CEER Shows a disconnection reason of the previous communication.
☛
P30
ex. Enter AT+CEER Display None Test AT+CEER=?
AT+CGDCONT Specifies the APN for packet communication.
☛
P30
AT+CGEQMIN Specifies the criteria for judging whether to approve the QoS (Quality of Service) level provisioned by
the network when the packet communication is established.
☛
P30
AT+CGEQREQ Specifies the QoS level requested to the network when transmission is performed during packet
communication.
☛
P31
AT+CGMR Shows the version of your FOMA terminal with a 16-digit number.
ex. Enter AT+CGMR Display None Test AT+CGMR=?
AT+CGREG= [n] Determines whether to notify the network registration state. Either “inside the service area” or “outside
the service area” is notified.
n=0: Not notified. (default and when parameter omitted)
n=1: Notified in the format of “+CGREG:n,stat”.
stat=0: Outside the service area stat=1: Inside the service area (home) stat=4: Unknown
stat=5: Inside the service area. (visitor)
*1, *2 ex. Enter AT+CGREG=1 Display AT+CGREG? Test AT+CGREG=?
AT+CGSN Shows the manufacturer’s serial number of FOMA terminal.
ex. Enter AT+CGSN Display None Test AT+CGSN=?
AT+CLIP= [n] Shows the caller ID of an incoming 64K data communication on the PC’s screen.
n=0: Does not show the information. (default and when parameter omitted)
n=1: Shows the information.
If you enter “AT+CLIP?”, it shows “+CLIP:n,m”.
m=0: The network setting that does not show caller ID to the other party when originating a call.
m=1: The network setting that shows caller ID to the other party when originating a call.
m=2: Unknown
*1, *2 ex. Enter AT+CLIP=0 Display AT+CLIP? Test AT+CLIP=?
AT+CLIR= [n] Specifies whether to show your caller ID to the other party when you originate a 64K data
communication.
n=0: In accordance with the service agreement. (when parameter omitted) n=1: Not notified.
n=2: Notifies the caller ID. (default)
If you enter “AT+CLIR?”, it shows “+CLIR:n,m”.
m=0: CLIR is not activated. (caller ID always notified) m=1: CLIR is activated. (caller ID always not
notified)
m=2: Unknown m=3: CLIR temporary mode (default for “not notified”)
m=4: CLIR temporary mode. (default for “notified”)
ex. Enter AT+CLIR=0 Display AT+CLIR? Test AT+CLIR=?
AT+CMEE= [n] Specifies the error report format of FOMA terminal.
☛
P30
n=0: Shows “ERROR”. (default and when parameter omitted)
n=1: Shows in the format of “+CME ERROR:xxxx”. (xxxx=numbers)
n=2: Shows in the format of “+CME ERROR:xxxx”. (xxxx=characters)
*1, *2 ex. Enter AT+CMEE=0 Display AT+CMEE? Test AT+CMEE=?
AT+CNUM
Shows the Own Number data of FOMA terminal in the format of “+CNUM:, “number”,type”.
number: Phone number
type=129: Does not show “+81”. type=145: Shows “+81”.
ex. Enter AT+CNUM Display None Test AT+CNUM=?
AT+CR= [n] Specifies whether to display the communication type (packet communication or 64K data
communication) before CONNECT is displayed, during line connection.
n=0: Does not show the information. (default and when parameter omitted)
n=1: Shows the information in the format of “+CR:serv”.
serv=SYNC: 64K data communication serv=GPRS: Packet communication
*1, *2 ex. Enter AT+CR=0 Display AT+CR? Test AT+CR=?
Command Description & Parameter
Next