Foma D902iS, Руководство пользователя

Страница: 55 / 517

53
Ma
ki
n
g
/R
ecei
vi
ng Cal
ls
1
Hold down
#
for over a second
･
Timed pauses can be entered in succession.
･
Each timed pause is followed by a second interval.
･
You cannot make a call if a timed pause is entered at the beginning of the phone number.
INFORMATION
●
Tone signals (DTMF) may not be received depending on the receiving device.
●
You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T).
●
When it is necessary to send tone signals (DTMF) following voice prompts as in making ticket reservations, the
speakerphone function is useful. In this case, input tone signals (DTMF) after turning on the speakerphone function.
Switching from a voice call to a videophone call
You can switch to a videophone call by operating from the submenu during a voice call when the other
party’s terminal can switch calls. Switching can be performed only from the terminal which made the
voice call.
･
This operation can be performed between the terminals that support switching between voice call/
videophone call.
･
To switch to a videophone call, the other party needs to set Indication ON of Notify Switchable Mode in
advance.
☛
P93
1
m1
during a voice call
z
Select
Yes
･
A guidance informing that the call is being switched is played during switching.
･
Select No to return to the voice call talking screen.
･
When Speakerphone is set to ON in Videophone Settings, the speakerphone function is automatically
turned on when the call is switched to a videophone call.
INFORMATION
●
During packet communication, disconnect the packet communication and switch to a videophone call.
●
When the other party is during packet communication, the call cannot be switched to a videophone call.
●
While talking on the phone using Call Waiting Service, you cannot switch the call to a videophone call.
●
It takes about 5 seconds to switch. In addition, it may take longer to switch depending on radio wave conditions.
●
Depending on radio wave conditions, a voice call and videophone call may not be switched and the call my be
disconnected.
●
A second call received while switching calls is rejected.
●
The speakerphone function is turned on/off every time a voice call and videophone call are switched.
●
The settings (such as switching the cameras or selecting the frame) during a videophone call are canceled every time a
voice call and videophone call are switched.
●
According to the call duration of a voice call and videophone call, the call charges are added up, respectively.
●
The call is not charged while
Switching...
is displayed.
●
Switching from a videophone call to a voice call
☛
P82
Swi
tchi
ng fr
om
a
voice call
to a vid
e
op
hone call
* From January 2001, the DoCoMo display beeper name has changed to “QUICKCAST”.