Foma D902iS, Руководство пользователя

Страница: 84 / 517

82
Making/
Rec
e
ivi
ng Vid
e
op
hone Cal
ls
●
If a videophone call made is not connected, redialing is automatically performed as described below:
●
When there is an incoming call while dialing a videophone call or redialing, the dialing may be interrupted and the ring
tone may sound.
●
Even if sending/receiving the voice or image is aborted and (voice only) or (image only) is displayed during
a videophone call, the call may be continued as it is.
●
When you talk on a videophone call while a flat type earphone/microphone set with switch (optional) is connected, the
voice sounds from the connected earphone/microphone regardless of the setting of Speakerphone in Videophone
Settings.
●
Please note that digital communication charges apply for videophone calls instead of voice call charges even if the
substitute image or Chara-den is used.
●
Videophone at 32K is intended for connection with devices such as PHS with which videophone calls at 64K may not be
available depending on the network condition. When a videophone call is made at 64K, the call type is automatically
switched to 32K when redialing if the communication environment of the other party is found to be 32K area. When ON
is set for
Auto redial as voice
in Videophone Settings, redialing at 32K is also given priority.
☛
P90
･
Even if a call is made at 32K, the charge is the same as digital communication charges at 64K.
●
If a videophone call is made to emergency calls (110, 119 or 118) from FOMA terminal while
Auto redial as voice
is set to
ON in Videophone Settings, the call automatically switches to a voice call.
Switching from a videophone call to a voice call
You can switch to a voice call by operating from the submenu during a videophone call when the other
party’s terminal can switch calls. Switching can be performed only from the terminal which made the
videophone call.
･
This operation can be performed between the terminals that support switching between voice call/videophone
call.
･
To switch to a voice call, the other party needs to set
Indication ON
of Notify Switchable Mode in advance.
☛
P93
1
m1
during a videophone call
z
Select
Yes
･
A guidance informing that the call is being switched is played during switching.
･
Select
No
to return to the videophone talking screen.
INFORMATION
●
For precautions when switching between a voice call and videophone call, see INFORMATION in “Switching from a
voice call to a videophone call”.
☛
P53
●
Switching from a voice call to a videophone call
☛
P53
Call type
Auto redial as
voice setting
Redialing operation
When a videophone call is made by specifying a multi-
number, redialing will be made with the specified
number.
When a videophone call with Chaku-moji is made,
redialing will be made with the same Chaku-moji attached.
If redialing as voice call occurs, voice call charges apply.
64K ON 64K → 32K → Voice call
OFF 64K → 32K → Disconnection
32K ON 32K → Voice call
OFF 32K → Disconnection
Ma
ki
ng vid
e
o
phone call
s