Foma D902iS, Руководство пользователя

Страница: 349 / 517

347
Displ
a
yi
ng/Editi
ng/Mana
gi
ng Data/Playing
Music
Making full use of infrared communication
About infrared communication
You can send and receive data to/from other
FOMA terminals, mobile phones or PCs provided
with an infrared communication function. Also, by
using the i-
α
ppli compatible with infrared
communication, you can link to devices having an
infrared communication function.
･
Infrared communication is not available while All
Lock, PIM Lock or Self Mode is on.
･
Infrared communication and USB connection
cannot be performed at the same time.
･
Data prohibited from outputting from FOMA
terminal cannot be sent/received. Note that the
data whose file restriction is set to
File restricted
with the same terminal and data in the
Data
transfer folder are excluded.
･
During infrared communication, and are
displayed on the top of the screen, and the
terminal is in data transfer mode (the same status
as outside the service area), so phone calls,
i-mode connection and data communication are
disabled. Also, you cannot switch to other
functions by pressing
b
.
･
The infrared communication function of FOMA
terminal conforms to IrMC 1.1.
･
Even if the terminal of the other party conforms to
IrMC 1.1, some data may not be sent/received
depending on the data type.
･
The data including pictograms may not be displayed
correctly when sent to other than i-mode terminals.
Even when sending to i-mode terminals, the data
including pictogram 2 may not be displayed
correctly depending on receiving terminals.
Using infrared communication
The maximum communication range is approximately
20 cm and the angle is within 15 degrees from the
center. Keep FOMA terminal pointing at the remote
device’s infrared data port and do not move it until all
the data have been sent or received.
･
Infrared communication may not be performed
properly in areas of direct sunlight or directly
under fluorescent lights.
･
The folder name that was set by the other
terminal may not be taken over even if you
receive all items of mail data.
･
If you receive mail, usual mail may be stored in
the folder for the Message i-
α
ppli in Inbox ,
Outbox
or
Unsent messages
.
･
With reception of all items of bookmark data,
the data you will receive covers the entire of the
folder created by the other terminal.
･
Bookmarks received from the terminal other than
D902iS may be stored in the top folder.
･
Images, video/i-motion or melodies received from
the terminal other than D902iS may be saved as
notes.
･
The receiver may not save images, video/i-motion
or melodies because of the difference in the data
size limit.
Sending data by infrared communication
Send Ir Data
You can send data by selecting each item to send
one at a time or by sending all items of the
specified function data at once. The following
data are available for sending:
Infrared data port
Within approx.
20 cm
15 °
15
°
Notes in receiving the data from the other
FOMA terminal via infrared communication
Notes on sending the data in D902iS to the other
FOMA terminal via infrared communication
Data type Remarks
Phonebook*
1
･
Phonebook data for which Secret
Attribute is set can be sent by
sending one item only when Secret
Mode is on.
･
PushTalk phonebook and Own
Number data are also sent when
sending all is performed.
･
Sending one item is unavailable for
the PushTalk phonebook.
･
Phonebook data cannot be sent
when Keypad Dial Lock is on.
･
In case
Ph.book image sending
is
ON
for Data Transfer Setting when
sending all, you can set whether to
send still images saved in the
phonebook data together.
･
Images saved in the phonebook
data may not be received
depending on the recipient.
･
The sorting order of the group may
not be reflected on the recipient.
Ab
out inf
rar
ed comm
un
ic
a
tion
Next