Foma D902iS, Руководство пользователя

Страница: 399 / 517

397
Net
w
or
k S
e
rv
ic
es
1
m8993
2
Perform the following operations
Using Multi Number
Multi Number
Up to 2 additional numbers (
Additional No1
and
Additional No2 ) can be used besides Basic
Number .
1
m8998
2 Perform the following operations
Making calls by selecting the number to notify
the other party
When making a call, you can select the number of
which you notify the other party in Call Option.
1 Enter a phone number
z m4
･
To make a call from the redial data:
r z
Highlight a party from the redial data
z
m5
･
To make a call from the received call history:
l z
Highlight a party from the received call
history
z m5
2 Select
Multi-No
field
z
Select the number
to notify the other party
3
m z
Select
Yes
INFORMATION
●
If you pull out the UIM or replace it by another UIM, the
settings for Multi Number saved in FOMA terminal
(name, phone number, etc.) may be deleted. In such a
case, register them again.
●
On the screen during the call receiving/dialing, the
names corresponding to the multi-numbers (
Basic
Number
/
Additional No1
/
Additional No2
) are displayed.
However, if a call is made following the setting of
Set
Multi Number , such as a call without specifying the multi-
number in Call Option, the name corresponding to the
multi-number is not displayed.
●
In the redial data, the names corresponding to the multi
numbers notified during the dialing are displayed.
●
In the received call history, the names corresponding to
the received multi-numbers are displayed.
●
When making a call from the redial data and received call
history, the multi-number corresponding to the name
which was used for the dialed/received call will be used
for the new call if the name is displayed. If not, the multi-
number specified in
Set Multi Number
will be used.
Item Operation procedure
Activate
1 z
Select Yes
Deactivate
2 z
Select Yes
Check setting
3 z
Select Yes
Item Operation procedure
Set Multi
Number
You can set a number for making calls by
switching multi-numbers in this setting.
1 z 1
to
3 z
Select Yes
Check setting
2 z
Select Yes
Number
Setting
Basic
Number:
基本契約番号 /
my phone
number
Additional
No1:
付加番号 1 /
Not recorded
Additional
No2:
付加番号 2 /
Not recorded
Multi number
call: Disable
Set the phone number subscribed to Multi
Number.
a
3 z
Select each item to set
Name :
Setting is available for each
Additional No1
/
Additional No2
(up to
20 one-byte or 10 two-byte
characters). For
Basic Number , the
name set in Own Number is
displayed.
Phone number :
Set the subscribed phone number
in
Additional No1 / Additional No2 .
Multi number call
:
If set to Enable , you can make a call
by selecting the number to be
notified to the receiver in Call
Option.
b
Press
p
Incoming calls
melody setting
OFF
Set the ring alert etc. for each
additional number.
a
4 z 1
or
2 z
Select each
item to set
Individual setting :
Select whether to set the incoming
call setting individually.
･
When OFF is set, the following
items cannot be set.
Ring alert, Show image :
Setting procedure
☛
P70
b
Press
p
Default
Default
･
When
Unspecified
is
selected, number set
in
Set Multi Number
is
used.
･
When
Multi number
call
is set to
Disable
in
Number Setting
,
multi-numbers
cannot be selected.
Mul
ti Number