Foma D902iS, Руководство пользователя

Страница: 191 / 517

189
Ca
m
e
ra
White balance
Natural color tone coordinated with the light source is
provided for shooting.
･
For details of operation
☛
P187
･
Unavailable when the scene mode/effect is set to
Super sensitivity up , Scenery , Surf&Snow , Woodcut ,
Mono tone (red) , Mono tone (green) , Mono tone
(blue) , Monochrome , or Sepia . Unavailable also
when the scene mode/effect is set to Twilight ,
Whiten or Suntan , as well as the above, during the
in-camera shooting.
Shake reduction
Set whether to use the shake reduction function.
･
For details of operation
☛
P187
INFORMATION
●
In the following cases, shake reduction is automatically
set to
OFF
and cannot be changed:
･
Shooting still image/video with the in-camera
･
Continuous shooting and four-frame shooting of still
images
･
When the still image size is 1200 x 1600 (UXGA) or
1728 x 2304 (4M)
･
When you shoot a still image while i-
α
ppli is running or
being set as the i-
α
ppli standby display
●
Camera shake may not be corrected in the following
cases:
･
When camera shake is too much
･
When the object is moving
･
When shooting with zoom
Even in other cases, note that camera shake may not be
corrected, depending on the object or shooting situation.
●
When you shoot still images using the shake reduction
function, sometimes images may be overlapped or
become grainier. In these cases, set shake reduction to
OFF .
●
When you shoot still images using the shake reduction
function, post-shooting process may take longer time.
●
When you record video using the shake reduction
function, the angle of coverage becomes narrower as
compared with the case where shake reduction is
disabled.
●
If you use the shake reduction function with the flicker
adjustment being set to Auto , flickering may not be
adjusted sufficiently. It is recommended that you change
the flicker adjustment setting according to the local
power supply frequency.
Frames
You can select frames saved in FOMA terminal or
frame images downloaded from sites.
･
For details of operation
☛
P187
: Frame is set : Frame is canceled
･
The frames registered in FOMA terminal by default
are applicable to image sizes of 176 x 144 (QCIF),
240 x 320 (QVGA) and 240 x 400 (standby).
☛
P424
･
Frames cannot be set when 96 x 72 (phonebook),
640 x 480 (H-VGA), 480 x 640 (V-VGA), 960 x
1280 (SXGA), 1200 x 1600 (UXGA) or 1728 x 2304
(4M) for image size of still image, or 320 x 240
(QVGA) for image size of video is set.
･
Canceling:
6
(for over a second)
INFORMATION
●
You can also select frames from the list by pressing
m31
on the still image shooting screen or video
recording screen.
●
If you select a frame that is opposite in horizontal and
vertical values to the image size, the frame is displayed
after rotating 90 degrees clockwise; for example,
suppose that you have selected a 144 x 176 frame when
the image size is 176 x 144 (QCIF). In this case, the
frame rotates 180 degrees by pressing
m33
on
the still image shooting screen or video recording screen.
Note that your frame cannot be rotated if it is the same as
the image size in terms of horizontal and vertical values.
●
If the frame is downloaded from a site during shooting,
the added frame becomes selectable by pressing
m34
on the still image shooting screen or video
recording screen.
Quality
Set the quality of still image or video to shoot.
･
For details of operation
☛
P187
Auto ：
Adjusts white balance automatically.
Sunlight ：
Sets when shooting outdoor in fine weather.
Cloudy ：
Sets when shooting in cloudy weather, shade or
evening.
Fluorescent light
：
Sets when shooting under illumination such as a
fluorescent lamp.
Bulb light ：
Sets when shooting under illumination such as an
electric bulb.
Auto
：
Shake reduction is automatically activated when
the settings and conditions for shooting are likely
to cause camera shake.
OFF
：
Shake reduction is disabled.
Changi
ng the sett
ings for
shootin
g
Next