Foma D902iS, Руководство пользователя

Страница: 498 / 517

13
Optimizing packet communication setup
The method of optimizing the PC packet
communication setup for FOMA network by means of
W-TCP setup and canceling optimization is explained
here.
The W-TCP setup is a TCP parameter tuning tool for
optimizing TCP/IP transmission capacity during packet
communication in the FOMA network. To enable
communication capability of FOMA terminal to
maximum extent, this communication setup is
required.
System optimization can be performed for each
dialup connection.
1
Start FOMA PC
設定ソフト
(
☛
P7)
z
Click
W-TCP
設定
■
Starting from the task tray: Click
2
Perform the following:
■ When the system has not been optimized:
a
Click
最適化を行う
on the W-TCP setting
screen
b
Select the dialup connection to be
optimized
z
Click
実行
(Execute)
Optimization of the system settings and
dialup settings are performed respectively.
■
When the system has been optimized:
The following screen appears. Make the
required settings if changes are to be made.
■ Deactivating optimization:
a
Click システム設定 (System setting) in
the
W-TCP
設定
(
ダイヤルアップ
)
(Set
W-TCP (dialup)) screen
The W-TCP setting screen appears.
b
Click 最適化を解除する (Deactivate
optimization)
3 Reboot the PC, following the instruction
shown on the screen
･
The settings take effect after rebooting the PC.
1
Start FOMA PC
設定ソフト
(
☛
P7)
z
Click
W-TCP
設定
■
Starting from the task tray: Click
2
Perform the following:
■ When the system setting has not been
optimized: Click
最適化を行う
■
When canceling optimization of the
system setting: Click
最適化を解除する
3 Reboot the PC, following the instruction
shown on the screen
･
The settings take effect after rebooting the PC.
Setting dialup connections (APNs)
Set the dialup connection (APN) for packet
communication.
Up to 10 dialup connections (APNs) can be set, which
are to be registered under registration numbers (cid) 1 to
10 for management.
By default, “mopera.ne.jp” is set for cid1 and
“mopera.net” for cid3.
･
Before setup, make sure that FOMA terminal and
the PC are properly connected.
☛
P3
･
For dialup connections (APNs) other than mopera
U / mopera, inquire your provider or network
administrator.
1 Start
FOMA PC
設定ソフト (
☛
P7)
z
Click
接続先
(APN)
設定
The FOMA
端末設定取得
screen appears.
2 Click
OK
FOMA terminal is accessed for reading the
registered dialup connection (APN) information.
For Windows XP
Under Windows 2000, Me or 98
Next