Foma D902iS, Руководство пользователя

Страница: 285 / 517

283
i-
α
ppli
4 Press
p
INFORMATION
● Even when auto starting is set, i- α ppli is not started if the
time of activation arrives in one of the following
situations. If i- α ppli is not started for the following
reasons (except for the ones marked with *1), is
indicated on the standby display and the name of i- α ppli,
the date and time and the reason for the start failure are
recorded in Start Failure History.
･
When FOMA terminal power is off*
1
･
When UIM operation is restricted (except for
pre-installed i-
α
ppli)
･
When UIM cannot be detected
･
When Auto Start is set to OFF *
1
･
The interval of auto start is too short
･
During a call, communication, or a PushTalk call
･
When a screen other than the standby display is
displayed or i-
α
ppli standby display operation is in
progress
･
When any other function is being used (excluding the
list display and edition of My Picture, the list display,
replay, and edition of i-motion, the list display and
replay of melody, or the list display and replay of Music
Player)
･
In All Lock, PIM Lock or Omakase Lock (Remote Lock)
･
When Privacy Mode is on (while Authorized access is
set to i- α ppli )
･
While an alarm clock or schedule alarm is sounding
(including when the set time is the same as the time
for Auto Start)
･
While Timer is in operation
･
When i-
α
ppli usage is stopped by the IP
●
When two or more i-
α
ppli applications are specified to
start automatically at the same time, only one i-
α
ppli is
activated. The failed i-
α
ppli information is recorded in
Start Failure History, but is not displayed on the
standby display.
●
In the User settings, the same setting set for other i-
α
ppli
cannot be set.
●
If all of the start time are set before the time set in Date
and Time Setting, auto starting will be disabled.
Displaying history when Auto Start of i-
α
ppli
fails
Start Failure History
If automatic start of i-
α
ppli fails, appears on the
standby display and the i- α ppli name, the date and
time and the failure reason are registered.
･
Up to 20 start failures are recorded. When there
are more than 20 abnormal exits, the 21st exit is
written over the oldest one.
･
When you display the start failure history or when
the next automatic start is successful, on the
standby display disappears.
1 Press
m331
■ Deleting the history:
p z
Select
Yes
Starting i-
α
ppli from a site or mail
i-
α
ppli To
Select a link item that can start the site or i-
α
ppli
of the site or i-mode Mail and then start the i-
α
ppli
(i-
α
ppli To).
1 Select a link item enabled to start i-
α
ppli
from the site or i-mode Mail
2 Select
Yes
The connection to the site is terminated and
i-
α
ppli is started.
INFORMATION
●
If the i-
α
ppli you attempt to start with i-
α
ppli To is not
saved in FOMA terminal, the message that there is no
specified i-
α
ppli is displayed and i-
α
ppli cannot be
started. Note that some i-
α
ppli may start just after
downloaded from sites even if it is not saved.
･
For i-
α
ppli that starts just after downloaded from a
site, a confirmation screen may be displayed asking
whether to make communication while it is activated.
･
When you quit i-
α
ppli started just after downloaded
from sites, a confirmation screen is displayed asking
whether to save i-
α
ppli. Note that some i-
α
ppli may
not be able to be saved in FOMA terminal.
Repeat
：
Set the condition for repetitive automatic
starting of i-
α
ppli.
･
When OneTime is set, set the date for auto
starting in Date field.
･
When Daily is set, i- α ppli starts
automatically at the time set in Time field
every day.
･
When Weekly is set, set the day of week
for auto starting in Weekly field.
Weekly
：
Set the day of week for auto starting when
Weekly is set for Repeat .
Date ：
Set the date for auto starting when OneTime
is set for Repeat .
Software
：
Specify whether to automatically start at the
intervals preset for i-
α
ppli.
i
-
α ppli 1 to 4 ：
Depending on i-
α
ppli DX, up to 4 conditions
of Auto Start can be set while it is operated.
Specify whether to enable the settings.
i-
α
ppli
To
Next