67
Trendline 3
alarm values. For more information about the classes of ISO 10816 see "ISO
10816
".
Universal type
To enter a characteristic value at a selected measuring point that is not
measured by the vibration or temperature sensor, you can set up a
universal
characteristic value
in the Trendline software. For each configuration you can
create several universal characteristic values. On the Detector you can enter for
example the machine temperature and the ambient temperature for the analysis
in the Trendline software. With the characteristic value type Universal you can
define custom alarm values.
Universal characteristic values are displayed in the Detector
without unit. To assign later what has b een measured with this
parameter, you should entitle the characteristic value accordingly
(e.g. "Machine temp. [C]"). In the Trendline software you can edit
the name in the "General settings" tab . On the Detector you can
only change the name in the settings of free measurements.
4.4.5 Editing / deleting sensors
If you have added custom sensors
in addition to the pre-defined sensors, you
can edit or delete them.
Editing a sensor
In the
Detector
menu click
Sensor
>
Edit
.
Select the sensor in the
Edit sensor
window.
Edit the settings (see also Add sensor
).
To edit the sensor name, click on
.
Click
OK
.
Deleting a sensor
In the
Detector
menu click
Sensor
>
Delete
.
Select the sensor to delete in the
Delete sensor
window and click
OK
.
As long as a sensor is still in use, thus it is assigned to a
measurement point, you cannot delete this sensor.
220
45
45