132
4.14.2 Alarm report
You have the option of displaying main alarms and pre-alarms in an alarm report
using the Trendline software.
The alarm report incorporates sections for main alarms and pre-alarms. All
characteristic values for a given measuring point will be displayed in the main
alarm section where at least one main alarm exists for this measuring point.
Characteristic values having a main alarm are displayed in bold; for pre-alarms
they are in italics. If neither a main alarm nor pre-alarm exists, the relevant
characteristic value is displayed in gray.
Where a main alarm exists for a characteristic value, the main
alarm threshold is used as reference for the exceeding value, and
where a pre-alarm exists the pre-alarm threshold is used as
reference.
To do this, select the element in the configuration tree from which you wish to
create the report.
Click on
Service
>
Alarm report
or click on
in the Toolbar
.
Select the
Time range
option to define the limits for the report period. Enter the
start and end time. Alternatively, you can enter the end time and specify the
duration in whole days in the
No. of days
input field. In this case the start time
will be determined automatically.
Deactivate the
Time range
option to incorporate all available data in the report.
Click on
OK
to create the report. The report window opens.
You can use the toolbar to control the screen display:
The display size can be defined in
View
. Select
Percent adjustable
to enter a
zoom factor expressed as a percentage in the
Percent
input field.
You can navigate forwards or backwards through the report and also jump to
the start or end of the report using the arrow buttons.
Click on
to print out the report.
40