183
FIS Viewer
Show vertical lines
Switched on
: the harmonics are identified in the
diagram using the cursor symbol and a vertical line.
Switched off
: the harmonics are identified using only the
corresponding cursor symbol.
Modifying the properties of the sideband cursor
In addition to the general cursor options described in Modify the cursor properties
you can also modify additional options of the sideband cursor (described
below). To do this, activate or deactivate the appropriate fields in the dialogue
window or select the respective value from the selection boxes.
Number of sidebands
In this field you can enter the number of sidebands that
must be calculated for the current cursor in each case.
Nearest points
The Trendline Viewer calculates the precise mathematic
values of the sidebands. The number of nearest points
specified in this field (existing measuring points in the
diagram) are then analyzed for maximum values and the
sideband marker is positioned at the nearest maximum
value.
Show coordinates
Switched on
: the measured values of the respective
sidebands on the x- and y-axes are displayed at the
vertical lines.
Switched off
: the measured values of the sidebands are
removed from the display.
Show vertical lines
Switched on
: the harmonics are identified in the
diagram using the cursor symbol and a vertical line.
179