Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 34 / 140

The low level configuration menu opens (figure 11 shows default values):
Control Network port
==================== Streaming Network port
======================
0. Speed/Duplex: auto_10_100_1000
1. IP Prov mode: static [dhcp]
2. address: 192.168.253.254
3. netmask: 255.255.255.0
6. mtu: 1500
7. VLAN ID: 0
8. controller ip: 192.168.254.254
9. Exit
10. Speed/Duplex: auto_10_100_1000
11. IP Prov mode: static [dhcp]
12. address: 192.168.254.254
13. netmask: 255.255.255.0
14. gateway: 192.168.254.1
16. mtu: 1500
17. VLAN ID: 0
18. Controller port: 5432
19. webserver port: 80
Please select an option:
Figure 11. Low Level Configuration Menu Page 1
NOTE: These values are held in local memory on the unit itself.
4. At the
Please select an option:
prompt, enter the number of the parameter you
wish to change followed by <
Enter
>:
•
0 a
or
10 b
— these options set the network link speed. When you choose either
option, you are offered a further choice:
1. auto_10_100_1000
— configures for auto speed negotiation up to 1 Gbps.
2. auto_10_100
— configures for auto speed negotiation up to 100 Mbps.
Enter
1
or
2
followed by <
Enter
> at the prompt. The default setting is
1. auto_10_100_1000
.
NOTE: A Gigabit network is recommended for streaming media applications.
•
1 a
or
11 b
— these options determine whether the IP address of the unit is static or
set by DHCP. When you choose either option, enter
static
or
dhcp
followed by
<
Enter
>. The default setting is
static
.
NOTES:
•
static
and
dhcp
are all lower case letters.
• When
1
is set to
dhcp
, options
2
and
3
are not available. When
11
is set
to
dhcp
, options
12
-
14
are not available.
•
2
a
and
12
b
— these options set the local address of the network port. Standard
rules for IP addresses apply. The default values are
192.168.253.254
(control
network) and
192.168.254.254
(streaming network).
Do not use leading zeros. For example,
192.168.10.25
is valid;
192.168.010.025
is not valid.
NOTE:
The control and streaming ports must be assigned to different subnets.
•
3 a
and
13 b
— these options set the network Subnet Mask. The default value is
255.255.255.0
.
Standard rules for IP Addresses apply. Do not use leading zeros.
•
14 b
— this option sets the IP address for the default gateway. The default value is
192.168.254.1
.
This value is required for systems with multiple subnets. The Default Gateway must
be on the same subnet as the streaming port.
VNM 250 • Low Level Device Configuration 26