Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 83 / 140

4. If required, use the
Framelock Ref
drop-down list (see figure 58 ,
3
, on the previous
page) to set up membership of a decoder genlock group (see Framelock Ref on page
60).
5. Select a video source from the
Source
drop-down list ( 4 ).
6. If required, select the
audio
and
data
check boxes ( 5 ).
7. Click the
Save All
tab.
Monitoring the Decoder Video Bandwidth
1 1
2 2
Figure 59. Decoder Bandwidth (video) Link
1.
In the
Display
tab, select a video source from the drop-down list (see figure 59, 1 ).
2. Click the
video
link (
2
). The
Bandwidth
(video) tab opens (see figure 60):
1 1
Figure 60. Bandwidth (video) Tab
3. Set the
Channel Delay
and
Frame Delay
(see figure 60,
1
). For more information
about the
Bandwidth
(video) tab, see Decoder video Bandwidth tab on page 62.
4. Save the changes by clicking
Save All
.
NOTE: The active status information on the video
Bandwidth
page only updates if
a video source is selected in step 1 above.
VNM 250 • Configuration with the VNM 250 GUI 75