Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 104 / 140

NEXT
LAN1-Control [IP, SM]
[IP address]
NEXT
NEXT
LAN1-Control [IP, SM]
[IP address]
NEXT
Less than
3 seconds
More than
3 seconds
LAN2-Stream [IP, SM]
[IP address]
LAN2-Stream [IP, SM]
[IP address]
NEXT
Sys Cntrl [IP, Port]
[IP address]
Sys Cntrl IP
[Item]
NEXT
Less than
3 seconds
More than
3 seconds
More than
3 seconds
Less than
3 seconds
Read Only Editable
Network
MENU
Figure 78. VNE 250 Encoder Network Submenu (Top Level)
To edit properties for any of these screens:
1. Navigate to the required screen.
2. Press the
Next
button for more than 3 seconds. The screen flashes rapidly and the
selected value is shown in angled brackets.
3. Edit the network properties as desired.
Control
The
LAN1-Control
editing screen allows you to adjust the IP address (
IP
) and the subnet
mask (
SM
) of the control network. The editing screen opens to show the IP address for
VNE 250 control port, with the first octet of the address enclosed in angled brackets (by
default, this is
<192>168.253.254
).
1. Use the right rotary encoder to adjust the value of the highlighted octet.
2. Use the left rotary encoder to highlight the next octet.
3. Use the right rotary encoder to adjust this value as required.
4.
Repeat steps 2 and 3 to adjust all four octets as required.
5. Press
Next
to show the subnet mask for the VNE 250 control port.
6. Repeat steps 1 to 4 to set the value for the subnet mask.
7. Press
Next
. You are prompted to save the changes. Use either rotary encoder to toggle
between
Yes
(save the changes and exit) and
No
(exit to the
LAN1-Control
screen,
without saving).
8.
If you select
Yes
, you are prompted to reboot the device. Use either rotary encoder
to toggle between
Yes
(to reboot) and
No
(exit to the
LAN1-Control
screen, without
rebooting).
9. If you select
Yes
, the VNE 250 reboots. If you select
No
, the VNE 250 does not reboot,
but the changes saved in step 7 are saved and are applied the next time the VNE 250 is
powered up.
Stream
The
LAN2-Stream
editing screen allows you to adjust the following properties of the
streaming network:
VNM 250 • Front Panel Menu Configuration 96