Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 31 / 140

System
Configuration with
the Enterprise
Controller
All Matrix systems require one device that acts as the system controller. For a small system
(ten devices or fewer), this can be either a VNE 250 or VND 250. For larger systems a
VN-Matrix Enterprise Controller must be used.
A system controlled by the Enterprise Controller can incorporate any VN-Matrix devices,
including recorders, into the system.
Systems controlled by a VNM 250 device cannot exceed 10 devices in total. A VNM 250
controller supports VNM 250 encoders and decoders and PCs running the VNS 104
software. It does not support recorders. If an incompatible VN-Matrix device is added to a
system controlled by a VNM 250 device, the controller cannot detect or control that device.
Controlling Your System with a VN-Matrix Enterprise Controller
1. Connect a PC and a VN-Matrix Enterprise Controller to the same network as the
components of your streaming AV system.
NOTE: The PC and Enterprise Controller must be connected to the same network
as the streaming port (LAN 2) of the VNM 250 device.
2. Open an internet browser on the PC and enter the IP address of the VNM Enterprise
Controller in the address bar. The login screen opens.
Figure 9. VN-Matrix Enterprise Controller Login Page
3. Enter the
Username
and
Password
.
NOTE:
Check with your Network Administrator for the Username and Password. If
they have not been changed from the default settings, the Username is admin (all
lower case) and there is no password (leave the box empty).
VNM 250 • System Configuration with VNM Enterprise Controller 23 23