Configuring the Decoder Audio
1
1
2
2
Figure 61.
Decoder Audio Bandwidth Link
1.
In the
Display
tab, ensure that the
Audio
check box (see figure 61,
1
) is selected.
2.
Click the bandwidth
audio
link (
2
). The
Bandwidth
(audio) tab opens. This is the same
as the
Bandwidth
(video) tab but has an
Audio
Control
panel (see figure 62):
1
1
2
2
3
3
Figure 62.
Bandwidth (audio) Tab
3.
Select the appropriate check boxes to output the received audio stream to the
HDMI
port, the
Analog
output port or both (see figure 62,
1
).
4.
The analog audio output level is controlled using
Analog
Output
Level/Mute
(
2
).
The output level is correct if the input level on the encoder was correctly configured for
optimum signal.
5.
Select the input level for the reverse audio, using
Analog
Input
Level/Enable
(
3
).
Set the value just larger than the maximum value that is being input. (For more
information about the
Bandwidth
on
page 63.)
6.
Click
Save All
to save the changes.
NOTE:
•
The active status information on this page updates only if the
audio
check
box is selected in step 1, above.
•
If the check box was not selected, no audio signal is carried by the selected
stream and there is no audio output by the VND 250, even if the
HDMI
or
Analog
Audio boxes are selected.
VNM 250 • Configuration with the VNM 250 GUI
76
Содержание VN-Matrix 250 Series
Страница 6: ......
