Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 67 / 140

•
Data Interface
is a read-only field that reports which of the
CAT 5
(by default) or
SFP
connectors is currently active on LAN 2.
•
Multicast TTL
(Time to Live) defines how many hops multicast traffic makes between
routed domains when it exits a source. If the TTL is not properly configured, information
that is to be sent back to a corresponding encoder may fail to function correctly.
Licensed Features
— contains the
License Management
button, which is used to license
features on the VNM250 series of units. As all VNM 250 units are supplied fully licensed, this
feature is not applicable to an end user and should not be used.
Configuration
— contains the
Display0
link (see Display tab below).
Output Configuration
Display tab
Select a decoder in the
Device List
tab. The
Device
tab opens. In the
Configuration
panel, click the
Display0
link:
1 1
2 2
3 3
4 4
5 5
Figure 41. Display Tab
The
Output Format
drop-down list has three scaling modes (see figure 41, 1 ):
•
Auto
— sets the display to the same resolution and frame rate as the source stream.
•
Monitor
— sets the decoder output mode to the preferred resolution and frame rate
of the output monitor. To operate correctly, this feature requires the monitor to support
EDID properly.
•
Fixed
— sets the decoder output mode to the chosen resolution and frame rate as
selected from the
Output Format
drop-down list.
NOTE: The
scale
option must be enabled whenever
Monitor
or
Fixed
output
formats are selected.
Enable or disable the
Nodata Splash
,
Scale
,
Genlock
,
Clean Switch
and
HDCP Mode
check boxes (
2
).
•
Select
Nodata Splash
to enable a splash screen to be displayed when the display
detects a break in the input data stream. When disabled the last decoded frame is
displayed. After startup, when no last decoded frame exists a black screen is displayed.
VNM 250 • VNM 250 GUI Overview 59