Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 18 / 140

6. Connect all the VNM 250 units to the network (see Network Connections on
page 16).
NOTES:
• Ensure that the LAN 2 port is connected to the designated streaming
network.
• The control port is used with IP Link or third-party control devices. A control
port connection is not required for normal operation of the VNM 250 unit.
7. Connect the video sources to the encoders and display equipment to the decoders (see
Video Connections on page 21).
8. Connect the audio sources to the encoders and the audio outputs to the decoders. If
required, connect the reverse audio input to the decoder and the reverse audio output
to the encoder (see
Audio Connections on page 22).
NOTE: The reverse audio feature allows users at the decoder site to communicate
with users at the encoder site.
9.
If required, connect USB cables to allow
KVM Function
. This allows users at the
decoder site to take control of the keyboard and mouse of the source computer at the
encoder site (see page 18).
10. If required, connect the encoder loop-through video (see Video Connections ) and
audio (see Audio Connections ) outputs.
11. If required, set up Genlock connections to synchronize the video streams to multiple
displays (see page 20).
12. Use a PC or laptop to access the web interface served by the controller.
For larger systems, see the
VN-Matrix Enterprise Controller User Guide . For smaller
systems, see
VNM 250 GUI Overview
on page 34.
13. Configure the video and audio input and output properties for all the devices, using the
appropriate GUI web interface.
NOTE:
Extron recommends configuring the audio and video connections through
the GUI web interface. Alternatively, it is possible to use the front panel menu.
VNM 250 • Installation Overview 10