Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 80 / 140

8. If RTP multicast source streaming is required, select
Multicast Enable
(see
figure 53 ,
7
on the previous page). If RTP unicast is required, ensure the box is not
selected.
ATTENTION:
• Use the same transport type for all streams. Check that the
Multicast Enable
setting on the data tab is the same as that on the video (see step 14 on
page 68).
• Veuillez utiliser le même type de transport pour tous les flux. Vérifiez que le
paramètre « Multicast Enable » sur l’onglet de données soit le même que sur la
vidéo (voir
étape 14 , page 68).
Configuring Encoder Data
1.
Click on the
Device
tab.
2. In the
Configuration
panel, click on
data
(see figure 54,
1
):
1 1
Figure 54. Device Configuration Panel
The
Configure
tab opens with data options.
1 1
2 2
3 3
4 4
5 5
Figure 55. Configure Tab (Data Options)
3.
If required, check the
Serial Enable
box (see figure 55, 1 ).
4. If required, check the
Udp Enable
box (
2
).
5. If required, enter a value for the
Udp port
number (
3
).
VNM 250 • Configuration with the VNM 250 GUI 72