Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 76 / 140

Configuring Encoder Video
9. In the
Configuration
panel, click on
VideoPort0
(see figure 47,
1
):
1 1
Figure 47. Device Configuration Panel
The
Configure
tab opens with video options.
1
1 1
2 2
3
3
4 4
5 5
Figure 48. Configure Tab (Video Options)
10. Ensure the
Input Channel
is set to
auto
(see figure 48,
1
).
11. Set the
EDID (D)
for the digital video input and the
EDID (A)
for the analog input, as
required (see figure 48,
2
).
12. If a digital source with HDCP is connected, ensure that the
HDCP Authorize
box is
selected ( 3 ).
13.
Ensure the
Current Mode
shows the format of the connected source ( 4 ).
14. If RTP multicast source streaming is
required, select the
Multicast Enable
box (
5
). A dialog is displayed asking for
a multicast address (see the figure to the
right). This must be obtained from your
network administrator.
If
RTP unicast is required, ensure the
Multicast Enable
box is deselected.
VNM 250 • Configuration with the VNM 250 GUI 68