4.
Fine-tune the custom input mode.
NOTE:
After the custom input mode is created for the VNE 250, you may need to
create a custom output mode to match.
TIPS:
It is recommended that:
•
When creating a custom input mode, monitors are connected to both the
video loop-out of the VNE 250 and the video output of the VND 250.
•
The same monitors be used in the final system configuration.
•
The monitor connected to the loop-out of the VNE 250 should be connected
to the HDMI output. This negates auto-detect errors that would exist if the
monitor was driven from the analog output.
Constructing a custom user source format
1.
From the
Device
List
, select the required encoder.
2.
When the
Device
tab opens, click on the
videoPort0
link.
3.
When the
Configure
tab opens, click the
Video Setup
tab.
1
1
2
2
3
3
4
4
Figure 67.
Constructing a Custom User Source Format
4.
Set the
phase
(see figure 67,
1
),
macrovision
defeat
(
2
), and
color
space
(
3
)
settings as desired (see
on page 79).
NOTE:
The above values are not saved as part of the source format; they are
global settings saved for the mode selected in the mode drop-down list. If auto is
selected from the mode drop-down list, the settings apply to any detected mode.
5.
Set
blanking
(
4
) to
auto
.
VNM 250 • Configuration with the VNM 250 GUI
81
Содержание VN-Matrix 250 Series
Страница 6: ......
