5.
Select option
9
(Exit) to enter the controller menu.
6. DHCPD/SLAAC server enable: none
9. Exit
Please select an option:
Figure 17.
Low Level Configuration Menu, Page 2
Ensure that options 6 is set to
none
.
6.
Select option
9
(Exit) to reboot the device.
The streaming network settings is configured when the VNM 250 device is connected
to a network with a properly configured system controller or DHCP server.
NOTE:
The VN-Matrix Enterprise Controller does not currently provide DHCP
server functionality.
Using a Dedicated DHCP Server
If required, a dedicated DHCP server can be used to provide the IP address settings for the
VNM250 device in a system.
The device that is acting as the system controller must have its IP settings configured
statically.
The other VNM250 devices in the system are to be configured for DHCP as described in
Configuring a VNM 250 Series Unit to Operate with a DHCP Server
on the previous
page.
If possible, the DHCP server should be configured to provide the controller IP address and
port number, using the Vendor Specific Option. Otherwise, the IP address of the system
controller must be entered on all VNM 250 devices in the system.
VNM 250 • Low Level Device Configuration
31
Содержание VN-Matrix 250 Series
Страница 6: ......
