Extron electronics VN-Matrix 250 Series, Руководство пользователя

Страница: 82 / 140

Configuring the Decoder Display
1. In the
Configuration
panel, click on
display0
(see figure 57,
1
):
1 1
Figure 57. Device Configuration Panel
The
Display
tab opens with display options (see figure 58). More information about the
Display tab can be found on page 59.
1 1
2 2
3 3
5 5
4 4
Figure 58. Display Tab
2. Set the
Output Format
from the drop-down list (see figure 58, 1 ):
•
Auto
— sets the display to the same resolution and refresh rate as the source
stream.
•
Monitor — sets the decoder output mode to the preferred resolution and frame
rate of the output monitor. To operate correctly, this feature requires the monitor to
support EDID properly.
•
Fixed — sets the decoder output mode to the chosen resolution and frame rate as
selected from the drop-down list.
NOTE:
The
scale
option must be enabled whenever
Monitor
or
Fixed
output
formats are selected.
3. Enable or disable the
Nodata Splash
,
Scale
,
Genlock
,
Clean Switch
, and
HDCP
Mode
check boxes ( 2 ). For more information about these check boxes , see
page 59.
figure 58
VNM 250 • Configuration with the VNM 250 GUI 74