Configuring a VNM 250 Series Unit for DHCP
VNM 250 devices can have their streaming port network settings configured using IP
addresses from a DHCP server.
For small systems, the VNM 250 device that is used as the system controller can also be
configured to act as a DHCP server. It is then used to set the streaming port parameters
of the other VNM 250 devices in the same system. For larger systems a Windows DHCP
server may be used.
NOTE:
The VN Matrix Enterprise Controller does not support DHCP server
functionality.
Configuring a VNM 250 System Controller as a DHCP Server
The following requirements must be observed:
•
The DHCP server runs only on a VNM 250 device that is configured as the system
controller.
•
The streaming network settings of the controller device must be statically assigned.
•
The controller IP address must be statically assigned.
To configure the VNM 250 system controller as a DHCP Server:
1.
Connect a control PC to the chosen unit and log in as described in
page 25.
Control Network port
====================
Streaming Network port
======================
0. Speed/Duplex: auto_10_100_1000
1. IP Prov mode: static
2. address: 192.168.253.254
3. netmask: 255.255.255.0
6. mtu: 1500
7. VLAN ID: 0
8. controller ip: 192.168.254.254
9. Exit
10. Speed/Duplex: auto_10_100_1000
11. IP Prov mode: static
12. address: 192.168.254.254
13. netmask: 255.255.255.255
14. gateway: 192.168.254.254
16. mtu: 1500
17. VLAN ID: 0
18. Controller port: 5432
19. webserver port: 80
Please select an option: 9
Figure 13.
Configuring a VNM 250 Series Unit as a DHCP Server.
2.
Set IP Prov mode (option
11
) to
static
.
3.
Ensure that option
12
has a valid IP
address
. This address must be in the same range
that the user wishes to allocate when DHCP is enabled.
4.
Ensure that option
13
has a valid
netmask
.
5.
Ensure that option
14
has a valid
gateway
.
NOTE:
If the gateway is invalid
or
not present, the unit is
not
able to act as a
DHCP server.
6.
Ensure that option
8
(controller address) is set to the same address as set in option
12
.
VNM 250 • Low Level Device Configuration
29
Содержание VN-Matrix 250 Series
Страница 6: ......
