EXFO FTB-860, Руководство пользователя, Страница: 95 / 409

RFC 2544 Test Setup and Results
NetBlazer
83
Subtests Configuration

Threshold : Select the threshold value in percentage of the line rate
(
%
),
Mbit/s
, or in
Gbit/s
. If the determined throughput value is greater
or equal to the threshold value, the test is declared as PASS . If the
determined throughput value for a specific frame size is lower than the
threshold value, the test is declared as
FAIL . This value applies to all
the 7 RFC 2544 frame sizes or for the 7 user-defined frame sizes. The
accepted values are as follows:
Note:
Threshold parameter will be editable only when the RFC 2544 Pass/Fail
Verdict parameter is Enabled in
Global Configuration on page 77.
Max.
Rate
Interface Speed
10 Mbit/s 100 Mbit/s 1000 Mbit/s 10G LAN 10G WAN
a
a. The maximum value for 10G WAN may be lower depending on the frame size. The maximum value will be
adjusted for each frame size.
%
Default: 0.000 - 100.000,
100.000
0.000 - 92.307
92.307
Mbit/s
Default: 0.000 - 10.000
10.000
0.000 - 100.000
100.000
0.000 - 1000.000
1000.000
0.000 - 10000.000
10000.000
0.000 - 9230.769
9230.769
Gbit/s
Default: Not Applicable Not Applicable 0.000 - 1.000
1.000
0.000 - 10.000
10.000
0.000 - 9.230
9.230