EXFO FTB-860 Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 409

EXFO FTB-860 Скачать руководство пользователя страница 118

EtherBERT Test Setup and Results

106

FTB-860/880

Summary Results

Summary Results

The Summary Results page allows you to not only view the status of the
test, but to also change certain parameters dynamically as the test is
running, such as injecting errors, changing the transmission rate, and
thresholds.

From the

Test

menu, press

Results

, and the

Summary

tab. By default,

Summary

page will be displayed, when the test starts.

Status



Status

: The

EtherBERT

test progress is monitored and updated on a

per second basis. The status displays the following:



“--”: test is not running or results are not available.Once the
EtherBERT test is stopped, the Pass/Fail verdict is displayed, when
enabled.



In Progress

: test is running.



Completed

: test is completed, stopped at the planned time, or

manually stopped when there is no set timer.



Aborted

: test is interrupted; test is stopped before the set time.

«
...
116
117
118
119
120
...
»

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов