manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 309 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 309

Common Test Setup, Results, and Functions

NetBlazer

297

Test Configurator - Interface

TX Frequency

TX Frequency

 indicates the frequency (actual fre offset) that 

will be used for transmission. 

Note:

The following frequency offset generation parameters are only available for 
SyncE test application with optical interfaces.

Offset (ppm)

 check box when selected (cleared by default), allows to 

set the frequency offset that will be generated. Use the “+” or “-” 
button to respectively increment or decrement the frequency offset 
value based on the defined 

Step Size

, or directly type the frequency 

offset value in the field. The range is ±120 ppm

1

. The default setting is 

disabled and set to 

0

 ppm. 

Step Size (ppm)

 allows to set the increment/decrement value (from 

0.1 to 120 depending on the test configuration) that will be used when 
changing the frequency offset using the “+” or “-” button. 

1. The frequency offset range is guaranteed for a source signal at 0 ppm. In the event that the source signal already has an 

offset then, the output signal may exhibit an offset larger than the range specified.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов