manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 298 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 298

Common Test Setup, Results, and Functions

286

FTB-860/880

Interface - Network

If 

IPv4

 is selected as the 

IP version

, configure the remaining fields as 

below.

DHCP

: Enable or disable the 

DHCP

.

Note:

If 

DHCP

 is 

Enabled

, all parameters are set to the values obtained through 

DHCP.

Note:

If 

DHCP

 is 

Disabled

, 

IP Address

 and 

Subnet Mask

 fields become 

configurable. When 

DHCP

 is 

Enabled

, the 

Default Gateway

 is 

automatically obtained from DHCP.

DHCP Server Address

: The 

DHCP Server Address

 displays the DHCP 

server IP address when DHCP is enabled.

DHCP Lease Obtained: 

The

 DHCP Lease Obtained

 displays the date 

and time that the IP address was leased from the DHCP server when 
DHCP is enabled.

DHCP Lease Expires: 

The 

DHCP Lease Expires

 displays the date and 

time that the IP address lease will expire when DHCP is enabled.

IP Address: 

If 

DHCP

 is disabled, enter the 

IP Address 

for the Ethernet 

port. The default IP address is 

10.10.0.0

. When the 

IP Address

 field is 

selected for editing using virtual keyboard, the 

Previous IP Addresses 

button appears on the screen. Press the corresponding function key to 
display the list of previously configured IP addresses. Select the desired 
IP address from the list, if any. The accepted range is from 

0.0.0.0

 to 

255.255.255.255

.

Subnet Mask

: If 

DHCP

 is disabled, enter the 

Subnet Mask

 for the 

Ethernet port. The default value is 

255.255.0.0

. When the 

Subnet Mask 

field is selected for editing using virtual keyboard, the 

Previous IP 

Addresses 

button appears on the screen. Press the corresponding 

function key to display the list of previously configured Subnet Mask. 
Select the desired Subnet Mask from the list, if any. The accepted range 
is from 

0.0.0.0

 to 

255.255.255.255

.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов