manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 282 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 282

Test Control

270

FTB-860/880

Headset/DTMF

Headset/DTMF

The 

Headset/DTMP

 pop-up window allows to connect a B-Channel 

(Speech or 3.1 kHz) to the headset and DTMF tones can be generated using 
the keyboard. The volume of the headset speaker and microphone is 
adjustable.

The settings here and on the platform are independent but platform 
settings may limit level control. For more information, refer to 

Adjusting 

Microphone and Speaker Volume

 from the platform user guide.

Note:

Both, hard and virtual keyboards can be used here. The hard keyboard is 
from FTB-1 and the virtual keyboard is from Headset/DTMF pop-up.

The 

Connect Headset/DTMF to Channel

 button:

Is gray when a 

Speech

 or 

3.1 kHz

 call is not active.

Is green when one or more 

Speech

 or 

3.1 kHz

 calls are active but not 

connected to the headset. This is the default state.

Is black when one 

Speech

 or 

3.1 kHz

 call is connected.

The list of channels in the drop down, or the NxM matrix, shows active 

Speech

 or 

3.1 kHz 

channels. Other channels including the D-Channel will 

not be visible in the matrix.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов