EXFO FTB-860, Руководство пользователя, Страница: 251 / 409

CPRI/OBSAI Test Setup and Results
NetBlazer
239
Summary Results

Bit Error Rate/Count graphically displays a meter representing either
the bit error rate or the bit error count depending on the
Pass/Fail
Verdict selection (refer to Bit Error on page 233).
When the verdict is enabled, the values under the threshold are
presented in green while the value above are in red.
When the verdict is disabled, bit error rate is displayed in blue and the
color range is in neutral range.
The arrow pointer indicates the current received bit error rate/count.
The Pass/Fail verdict is displayed just on top of the meter when
enabled. Refer to
Bit Error
on page 233 for more information.

Bit Error mode and Rate/Amount

Manual
: Enter the amount,
1
(default) through
50
, of manual error
to be generated.

Rate
: Select the injection rate for the selected error. The rate must
be within the minimum and maximum values specified.

Max Rate
: Generates the selected error to its theoretical maximum
rate.

Inject
button
For Manual mode: Manually generates the selected errors according to
the defect and the amount selected.
For Rate and Max Rate : Generates respectively the selected error at
the rate specified or at its theoretical maximum rate.