manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 240 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 240

FC BERT Test Setup and Results

228

FTB-860/880

Summary Results

Status

Status

: The 

FC

 test progress is monitored and updated on a per second 

basis. The status displays the following:

“

--

”: Test is not running or results are not available.Once the Fibre 

Channel test is stopped, the 

Pass/Fail 

verdict is displayed, when 

enabled.

In Progress

: Test is running.

Completed

: Test is completed, stopped at the planned time, or 

manually stopped when there is no set timer.

Aborted

: Test is interrupted; test is stopped before the set time.

Start Time

Start Time

: The time when the Fibre Channel test was started.

Pattern

Pattern Loss

: Alarm is raised if Bit Error is detected on four 

consecutive words.

No Traffic

: Alarm is raised for no traffic being transmitted when Login 

Management fails. A pop up is displayed with the following message: 

No Data is being transmitted on Port(s) <port number>. The Login 
process has failed.

Traffic

RX Rate

: Displays the receive rate in terms of a percentage of the line 

rate(

%

), 

Mbit/s

, 

Gbits

, or in 

MB/s

. It also displays the count of frames 

received per second.

TX Rate

: Allows to set the transmission rate in terms of a percentage of 

the line rate (

%

), 

Mbit/s

, 

Gbits

,

 

or in 

MB/s

. It also displays the count of 

frames transmitted per second.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов