EXFO FTB-860 Скачать руководство пользователя страница 88

Страница: 88 / 409

RFC 2544 Test Setup and Results

FTB-860/880

Configuring an RFC 2544 Test

10.

For additional results, refer to

Graph

on page 96,

Alarms/Errors -

Ethernet/Fibre Channel

on page 329, and

WIS Traces/Label

page 343.

11.

Press

Start

to start the test.

Summary

result page will be automatically

displayed. See

Summary Results

on page 88.

Note:

At least one of the RFC 2544 test procedures (

Throughput

Back-to-Back

Frame Loss

, or

Latency

) has to be enabled to start the test. Test

procedures, those that are enabled will be performed following this order:
Throughput, Back-to-Back, Frame Loss, and Latency.

12.

If required, press the

Report

button from the side panel to generate the

report file of the results and statistics. For more details, See

Test Control

on page 243.

Содержание FTB-860


























































































































































































































































































































































































































Результаты поиска

Содержание FTB-860

Отзывы:

EXFO FTB-860, Руководство пользователя, Страница: 88 / 409

Результаты поиска

Содержание FTB-860

Отзывы: