manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 179 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 179

Trace Route Test Setup and Results

NetBlazer

167

Summary Results

Summary Results

From the 

Test

 menu, press 

Results

, and the 

Summary

 tab.

To succeed, a 

Trace Route

 command shall be acknowledged by the 

network device within a given delay (Timeout). Typically a 

Trace Route

 

command can fail for the following reasons:

The IP address is unavailable or unknown.

The time allowed to perform the 

Trace Route

 command is too 

short.

The remote device is not supporting ICMP messaging.

The Trace Route results are displayed with the following columns:

No.

: Indicates the attempt number.

Status

: Indicates the status of the attempt as follow:

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов