EXFO FTB-860 Скачать руководство пользователя страница 68

Страница: 68 / 409

EtherSAM Test Setup and Results

FTB-860/880

Summary Results

The

Summary

page displays the following results.



The

Service Configuration Test

and the

Service Performance Test

field displays the current status of the respective tests. The verdict is
displayed only, if it is enabled. To set the Pass/Fail verdict, see

Pass/Fail

Verdict

on the

Global Configuration

on page 41. The Pass/Fail verdict is

displayed on the screen with the help of the following icons:

= Pass

= Fail

The following is the list of status:



“

” (test has not started)



Disabled

This status will appear when the subtest is disabled.



Running

: A subtest is currently running.



Data Transfer

: This status will appear when subtest is running but

no test traffic is being transmitted.



Completed

<Verdict> A sub test has completed. <Verdict>

represents the test global verdict upon completion of the sub test.



Aborted

A sub test has been aborted either manually (Stop) or by

an alarm. <Reason> represents the reason why the test has been
aborted. Possible reasons are:

Link down alarm

LOS alarm

DTS connection failed

Timeout during execution (DTS)

Unresolved addresses

No test enabled

Invalid Configuration (DTS only)

Stopped.

Содержание FTB-860


























































































































































































































































































































































































































Результаты поиска

Содержание FTB-860

Отзывы:

EXFO FTB-860, Руководство пользователя, Страница: 68 / 409

Результаты поиска

Содержание FTB-860

Отзывы: