EXFO FTB-860 Скачать руководство пользователя страница 274 | Manualshive

Страница: 274 / 409

EXFO FTB-860 Скачать руководство пользователя страница 274

Test Control

262

FTB-860/880

Report Button

Report Button

Reports can be generated for all tests at the exception of

Smart Loopback

test.

The report contains all the information about the test including the job
information, system information, interface setup, test summary, test
configuration, results, etc.

Note:

Nothing prevents the configuration and alarm/error injection setup while
the test has been stopped; thus, the report should be printed before
changing any test parameters to avoid printing discrepancy between the
configuration and results.

The

Report

button allows to save, open, import, export, and delete test

report(s). The Report button is available when the test is running or
stopped, but the report generation is only possible when the test is
stopped.

«
...
272
273
274
275
276
...
»

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов