EXFO FTB-860 Скачать руководство пользователя страница 73

Страница: 73 / 409

EtherSAM Test Setup and Results

NetBlazer

Service Configuration Test Results



Informational

Note:

The

Informational

parameters are for information purpose only, that is,

they are not included in the test verdict.



Max Jitter (ms)

: indicates the maximum measured delay

variation.



% Frame Loss

: It specifies the percentage of the frame loss value.



Round-trip Latency (ms)

: indicates the average measured round

trip latency (delay).



SLA Verified



Max Throughput

: indicates the measured maximum utilization

throughput. The verdict is also displayed indicating if the
maximum throughput complies (pass ) or not (fail

) to the

maximum allowed value based on either the configured EIR or CIR
when EIR is not enabled.

Содержание FTB-860


























































































































































































































































































































































































































Результаты поиска

Содержание FTB-860

Отзывы:

EXFO FTB-860, Руководство пользователя, Страница: 73 / 409

Результаты поиска

Содержание FTB-860

Отзывы: