manualshive.com logo in svg

ERT SpiroSphere, Инструкция по эксплуатации, Страница: 29 / 136

Поделиться
Скачать
ERT SpiroSphere Скачать руководство пользователя страница 29

SpiroSphere

®

 ECG Instructions for Use

Page 29/136

Version 02.02 • 04AUG2022

Perform a Forced Spirometry Measurement

The patient breathes normally ( gure 

1

) until a steady tidal breathing is shown. From tidal 

breathing, the patient is instructed to inhale as deeply as possible (inhale to TLC -  gure 

2

).

1

2

Please note: During the whole examination the patient must stay on the mouthpiece.

to TLC

Screen display:

Tapping on the "i"-symbol will 
display information on the 
measurement procedure.

When the test is started, an automatic zero adjustment of the sensor unit is performed. Hold the 
SpiroSphere Sensor still and wait for the zero adjustment to be completed before approaching the 
mouthpiece.
As soon as the zero adjustment is completed, the patient should close his/her nose with the 
nose-clip, take the mouthpiece between his/her teeth and seal his/her lips tightly around the 
mouthpiece. Check the correct position of the mouthpiece! For safety reasons, testing should be 
preferably done in the sitting position, using a chair with arms and without wheels.

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов