manualshive.com logo in svg

ERT SpiroSphere, Инструкция по эксплуатации, Страница: 127 / 136

Поделиться
Скачать
ERT SpiroSphere Скачать руководство пользователя страница 127

SpiroSphere

®

 ECG Instructions for Use

Page 127/136

Version 02.02 • 04AUG2022

Bluetooth

®

 Wireless Communication

Bluetooth is a wireless technology standard for exchanging data over short distances from  xed 
and mobile devices and building personal area networks (PANs). IEEE standardized Bluetooth as 
IEEE 802.15.1. The maximum output power the Bluetooth radio is 2.5mW. The typical range of 
operation is approximately 30 feet (10 meters). Bluetooth is used to pair the ECG unit with its data 
collection devices and transfer test data between them. Bluetooth links use encryption algorithms 
that are widely considered acceptably strong. The strength of Bluetooth security relies primarily 
on the length and randomness of the passkey used for Bluetooth pairing, during which devices 
mutually authenticate each other. The encryption procedure enables encryption of the data sent 
over the air-interface to prevent unintended eavesdropping.

COR12
CS10785

Corscience GmbH
Hartmannstr. 65
91052 Erlangen
Germany
+49 9131 977986-0

FCC ID: T7VPAN10

Assembled from tested components 
Complete system not tested

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interferences, and (2) this device must accept 
any interference received, including interferences that may cause undesired operation.

FCC Notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
it may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is  

 connected.
• 

Consult the dealer or an experienced radio/TV technician for help.

Bluetooth

®

 is a registered trademark of Bluetooth SIG, Inc.

Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject 
to the following two conditions: (1) this device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil 
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage 
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC: 216Q-PAN10

Содержание SpiroSphere









































































































































Отзывы:

Нет отзывов